Store

Our Products: Bobcat Rubber Tracks

Rubber Track for Bobcat® T250 T300 T320

Bobcat T770 Rubber Tracks 6678749
Rubbertrax
Rubber Track for Bobcat® T250 T300 T320
Buy aftermarket replacement rubber tracks for Bobcat® compact track loaders: T-250, T-300, T-320, T-770, and T-750 online and save. This is the eighteen inch wide version known as the 450x86x55. Save online and skip the trip to the dealer. This rubber track ships free when you order online.
SKU: RTC00506
Weight: 530 lbs
Make: Bobcat
Which Rubber Track Size: 450 x 86 x 55
Shipping: Fast and Free!
Price: $2,045.00

Free Shipping Across the USA

This is the highest quality aftermarket replacement rubber track for the Bobcat® compact track loaders known originally as part number 6678749. The tread pattern shown is the actual tread pattern you will receive and optional tread patterns may also be available upon request. The track is eighteen inches (450 mm) wide. This rubber track is guaranteed to fit models:

  • Bobcat® T250
  • Bobcat® T320
  • Bobcat® T300
  • Bobcat® T740
  • Bobcat® T750
  • Bobcat® T770

Other tread patterns may be available for your Bobcat® T300 track loader. See the alternate options at the bottom of our page or please call if you have specific needs.


Alternate Part Numbers

  • Bobcat® Dealer Part Number: 6678749

Optional Track Availability

This is one of our most popular rubber track sizes so we have a wide variety of tread patterns including the original C-Tread, Zig Zag, Turf-Friendly, and more. We also stock this size in a sixteen inch wide option that also has many tread patterns available.

Reliable Rubber Track Quality

Our skid steer track loader rubber tracks are made with helically wound continuous steel cords that are coated for protection against rust. These rubber tracks are designed for reliable service in rigorous conditions. We use non-recycled rubber in our most technologically advanced factory that strives to bring continuous improvements to our quality products. Our cut-resistant edges and premium heavy-duty guide systems deliver the absolute best quality rubber tracks in the aftermarket.

We offer the full undercarriage for the Bobcat® T300 ~ T770 compact track loader series.



This track comes with a standard factory warranty against manufacturing defects. If sprockets are purchased and installed together with the tracks, you will maximize the lifespan of the rubber track and minimize your chance at a premature failure. Always consider changing your sprockets and any worn undercarriage parts when you change your tracks. Rubber tracks and sprockets are designed to wear together and changing sprockets at any other time would reduce the lifespan of both the track and the sprocket. Other worn parts can effect the tensioning of the track and can cause de-tracking and other wear issues.


Bobcat T770 Tracks

Look for this stamp inside your original T 770 to verify this is the correct replacement track.


Tread Patterns Commonly Available

Staggered Block Tread Pattern

The off-set block tread pattern is the most general purpose tread pattern for wide spread job site applications. Adequate traction with maximum floatation helps prevent damage to sensitive areas while still providing enough traction for typical job sites.

Offset C Pad Tread Pattern

The off-set C tread pattern is common among original equipment manufactures because it gives significant forward traction and grip as well as extra traction provided by the C shaped pads when operating across a slope, even though that is not suggested practice. The original Bobcat® C-pattern track is part number: 6678749, and 7316763.

Zig Zag Tread Pattern

This tread pattern allows for maximum traction in a wide variety of applications including mud, snow, and slopes. The additional tread depth gives you more forward traction with just enough jagged zig zag edges to provide traction on a slide slope. The original Bobcat® Zig Zag tread pattern track is part number: 7374157, 7305724EF, and 7374158

Multi-Bar Tread Pattern

The Multi-Bar tread pattern is common on original Cat® track loaders and is best used in places where floatation matters such as sandy or snow conditions. The original Bobcat® MBL track is part number: 7320105

Turf-Friendly Tread Pattern

The turf-friendly is a newer option for rare cases when you are using a full sized track loader for finishing residential work or situations when minimal traction is required. This track minimizes vibration on the operator. The original Bobcat® Hex tread pattern track is part number: 7327933, 7327933EF in the Earthforce aftermarket version.