Rubber Track CAT 299D-Series Snow Tread

Cat 279D 450x86x60 Rubber Tracks

Buy aftermarket replacement rubber tracks for Caterpillar and Bobcat^® compact track loaders online with free shipping to commercial addresses. This track fits many models from several manufacturers so there are several original part numbers to reference. The tread pattern shown is quickly becoming the most popular traction tread pattern for snow and mud, but others are available upon request. The track is eighteen inches (450 mm) wide. This track comes backed by a factory warranty. This track is a direct replacement for Caterpillar^® part number 304-1909 and Bobcat^® original part number 7266334. This rubber track is the widest option width and longest link count for the following models:

• Caterpillar^® 279C (372-5791)
• *Caution, the rest of the Cat 279 series take the 56 link track
• Caterpillar^® 289C With serials starting with JMP
• Caterpillar^® 289D (570-4100)
• *Caution, the rest of the Cat 289 series take the 56 link track
• Caterpillar^® 299C (570-4100)
• Caterpillar^® 299D
• Caterpillar^® 299D2
• Caterpillar^® 299D3 (593-1012)
• Caterpillar^® 299 XHP (593-1012)

Late model Bobcat^® T870 60 Link Tracks

Bobcat^® T870 owners with late model serial numbers also require this track size which is two links longer than the previous generation T870 track. The T870 serial numbers below originally came with the sixty link option:

• B47C11001 & Above
• B47L11001 & Above
• B47H11001 & Above

This track is also a common option for most of the D3 series Caterpillar models. This track has sixty metal embedded guide links down the center for the sprocket to engage so please verify the lug count and width of the track before ordering.

You must verify the width of the track and quantity of drive links.

Tread Patterns Commonly Available

	The off-set block tread pattern is the most general purpose tread pattern for widespread job site applications. Adequate traction with maximum floatation helps prevent damage to sensitive areas while still providing enough traction for typical job sites.
	The off-set C tread pattern is common among original equipment manufactures because it gives significant forward traction and grip as well as extra traction provided by the C shaped pads when operating across a slope, even though that is not suggested practice. The original C-Pad for the Bobcat® T870 is known as part number 7266334.
	The Multi-Bar tread pattern is common on original Cat® track loaders and is best used in places where floatation matters such as sandy or snow conditions.
	This tread pattern allows for maximum traction in a wide variety of applications including mud, snow, and slopes. The additional tread depth gives you more forward traction with just enough jagged zig zag edges to provide traction on a slide slope. The original Zig Zag for the Bobcat® T870 is known as part number 7329954 and 7336540EF in the EarthForce version.
	The turf-friendly is a newer option for rare cases when you are using a full sized track loader for finishing residential work or situations when minimal traction is required. This track minimizes vibration on the operator. The original Hex pattern for the Bobcat® T870 is known as part number 7374153.