Gehl RT 175 RT 210 Mustang Bottom Roller

There are typically three bottom rollers per side on the RT175 and four per side on the RT210 and RT 250. Please make sure your bottom roller does not have a center flange that runs down the center of the rubber track guiding system. That is a different part number that many dealers have started using in the front position. We have both options.

These track rollers are interchangeable among many models and brands of compact track loaders. Sometimes a picture is worth a thousand words so if you want to send us a picture of the part you are trying to replace that might be the best option. On the early models for Gehl, Mustang, and Yanmar, this was the only bottom roller option but newer series and now other manufacturers are using this roller in combination with triple flange rollers to create a more stable version of their track loader undercarriage. This item is exactly as pictured, but if you have any questions or concerns about fitment just give us a call.

The Mustang skid steer loaders have had significant changes to the undercarriage. The previous generation MTL series track loaders are interchangeable with Takeuchi undercarriage rollers. When the Mustang was changed to Manitou manufacturing there were several changes to the bottom roller setup. Some serial breaks have a dual flange roller in the front position with triple flange bottom rollers down the rest of the undercarriage. Some have all dual flanges, yet others have all triple flanges. It is best to check your manual for your exact configuration, or look between each roller position and check to see if you are using dual flange or triple flange. Both rollers are shown below for reference. Please give us a call if you have any questions.

Dual Flange Roller 271020	Triple Flange Roller 50312634

Yanmar T-210 T-175 Track Loader Parts

• Yanmar Sprocket: 172551-03380
• Yanmar Front Idler: 172551-03490
• Yanmar Bottom Roller: 172551-03510
• Yanmar Rear Idler: 172551-06370