Free Shipping on Ground shipments and Commercial Freight Shipments!!!! Restrictions Apply

Store

Takeuchi TL8 TL130 TL230 Sprocket

Takeuchi TL8 TL130 TL230 Sprocket
Rubbertrax
Takeuchi TL8 TL130 TL230 Sprocket
Buy drive sprockets compatible with 08801-66210 for your Takeuchi TL 8, TL 130, TL 230, and Mustang MTL 16 online at Rubbertrax and save money versus going to the dealership. Save online and skip the trip to the dealer. This drive sprocket ships free when you check out online.
SKU: 880166210
Weight: 52 lbs
Make: Takeuchi
Shipping: Fast and Free!
Price: $335.00

Free Shipping Across the USA

08801-66210 Takeuchi TL 130 Drive Sprocket

This is the replacement aftermarket drive sprocket for the following Takeuchi compact track loaders:


  • Takeuchi TL8
  • Takeuchi TL130
  • Takeuchi TL230
  • Mustang MTL 16
  • Mustang MTL 316

This sprocket is commonly known as part number 08801-66210 from the factory. This sprocket is also interchangeable with the GEHL CTL 60 and Mustang MTL 16 track loaders.


Sprocket specifications:

  • 16 Teeth
  • 9 Bolt Holes
  • Inside Diameter: 7 3/4 Inches
  • Outside Diameter: 18 3/4 Inches
  • Width at Base of Tooth: 1 1/2 Inches

The Takeuchi track loaders commonly wear sprockets at the rate of the rubber track wear. Please check the wear on your rubber track links and your sprocket at the same time and rotate or replace as needed.


Rubber tracks and sprockets for the TL 130 are offered in package discounts to save you money. We always suggest changing your sprockets and tracks at the same time because that will maximize the lifespan of the track and the sprocket. The Takeuchi TL8 weight is being distributed across the undercarriage and the stress on the drive links at the sprocket is considerable. Maintaining even wear on your sprocket is critical to prevent breaking drive links due to the heavy operation weight and high speed travel of the Takeuchi track loaders.



Alternate Part Numbers

  • Takeuchi Dealer Part Number: 08801-66210

Alternate Models

This sprockets (08801-66210) is known to fit:

  • Takeuchi TL8
  • Takeuchi TL130
  • Takeuchi TL230
  • Mustang MTL 16
  • Mustang MTL 316

Takeuchi Sprockets

Our Takeuchi track loader sprockets start out with high quality steel. Since the focus of the hardening is localized to the drive teeth we use a type of spin induction heat treatment followed by an immediate quenching process which rapidly hardens the tooth several millimeters deeper than our competitors sprockets. Our sprockets are hardened within millimeters of the OEM sprocket providing you the best value for your replacement parts. Changing sprockets with the rubber tracks will maximize the lifespan of the tracks. It is not cheap to replace tracks so you want to maximize the track lifespan by installing new sprockets at the same time on your track loader.

Takeuchi TL130 sprocket locationThe Takeuchi TL130 drive sprocket is installed with nine bolts to the drive motor at the top of the undercarriage and the rear of the machine. You can see the complete parts diagram for this undercarriage using the Takeuchi TL130 diagram for reference as the Takeuchi and Gehl are interchangeable parts.


Aftermarket Takeuchi TL 130 Construction Parts

Takeuchi TL130 Drive Sprocket
Takeuchi TL130
Drive Sprocket
Takeuchi TL130 tensioner idler
Takeuchi TL 130
Tensioner Idler
Takeuchi TL130 Bottom Roller
Takeuchi TL 130
Bottom Roller
Takeuchi TL130 Front Roller
Takeuchi TL130
Front Roller
Takeuchi TL130 Rubber Tracks
Takeuchi TL 130
Rubber Tracks