Free Shipping to commercial address. *Restrictions apply


Mustang 2250RT 3200VT Track Loader Sprockets

Mustang 2250RT 3200VT Sprockets
Mustang 2250RT 3200VT Track Loader Sprockets
This is one of the optional replacement drive sprockets for Mustang 150RT, 2250RT, and 3200VT compact track loaders. Save online and skip the trip to the dealer. Free shipping when you order online. You must verify your existing bolt hole and drive teeth count.
SKU: 2250RT3200VT
Weight: 60 lbs
Make: Mustang
Shipping: Fast and Free!
Price: $341.00

Rubber tracks and wear parts are sold individually unless specified in the details. We offer free shipping across the USA when you order online and ship to a commercial address. *Some restrictions apply.

This is the aftermarket replacement drive sprocket for several Mustang compact track loader models. There are three options for the drive sprockets for these models based on your serial number. This sprocket is designed for serial breaks: 401201 and above as well as serial numbers 080301 and above. If you do not know your serial number the easiest way to determine the sprocket you need in this case is to count the drive teeth and the bolt holes. This Mustang sprocket is directly interchangeable with the seventeen tooth sprocket with eight bolt holes. There is a seventeen tooth sprocket with twelve bolt holes that we do not currently offer. We also offer the sixteen tooth sprocket for the other serial ranges. If you need any assistance determining which sprocket you have just reach out to us over chat or call us for assistance. Please verify these sprocket specifications below prior to ordering online.

Mustang Sprocket specifications:

  • 17 Teeth
  • 8 Bolt Holes
  • Inside Diameter: 9 Inches
  • Outside Diameter: 18 1/2 Inches
  • Width at Widest Point: 1 7/8 Inches

We carry the entire undercarriage for these Mustang 1750RT and 3200VT track loaders. The factory recommends replacing the sprockets and the tracks at the same time to maximize the lifespan and prevent premature wear. Always hand tighten your sprocket to the manufacturer suggested torque requirements to prevent any damage to the travel motor or the sprocket. Our sprockets are designed as a direct replacement part so you can reuse your factory bolts for installation.

Alternate Part Number: Mustang dealer part number:
Alternate Model:
This sprocket is designed to fit the following models:
  • Mustang 1650RT
  • Mustang 1750RT
  • Mustang 1750RT NXT3
  • Mustang 1850RT
  • Mustang 2100RT NXT3
  • Mustang 2150RT
  • Mustang 2500RT
  • Mustang 2500RT NXT3
  • Mustang 2550RT
  • Mustang 3200VT
Alternate Part: There is an optional 16 tooth sprocket for lower serial ranges and an optional twelve bolt hole sprocket. Please determine how many teeth and bolt holes your existing drive sprocket has to determine which sprocket to order.