Store

Our Products: Kubota

Kubota U-35-4 Sprockets RC788-14430

Kubota KX 71-3 KX 91-3 Sprockets RC417-14430
Rubbertrax
Kubota U-35-4 Sprockets RC788-14430
Buy Kubota KX 71-3, KX 91-3, U25, U35 replacement sprockets online at Rubbertrax and save money on your maintenance budget. Save online and skip the trip to the dealer. This sprocket ships free when you check out online.
SKU: RC788-14430
Weight: 19 lbs
Make: Kubota
Shipping: Fast and Free!
Price: $220.00

Free Shipping Across the USA

The RC788-14430 is a replacement part number for original part number RC417-14430 from the dealer. Kubota U35 specific sub series are utilizing the same drive sprocket as the previous generation KX71-3 and KX91-3 models. This is the premium replacement aftermarket sprocket for the following Kubota mini excavators:

  • Kubota U-35
  • Kubota U-35-S2
  • Kubota U-35-4
  • Kubota KX 71-3
  • Kubota KX 91-3
  • Kubota U-25 Serial Numbers: 20001 to 25293 (the newer serial numbers require part number RB511-14432)

RC417-14430 Sprocket specifications:

  • 21 Teeth
  • 9 Bolt Holes
  • Inside Diameter: 7 3/8 Inches
  • Outside Diameter: 14 1/8 Inches
  • Width at Base of Tooth: 1 3/16 Inches

You can reuse your original hardware to tighten the sprocket down to the drive motor but be careful not to over torque the nuts. Hand tighten to the proper torque requirements for your model. Refer to your owner or maintenance manual for installation details.

Alternate Part Numbers

  • Kubota Dealer Part Number: RC788-14430, RC417-14430

Optional Sprocket Fitment

The Kubota U25 has a serial break at 25293 and the newer serial numbers require part number RB511-14432

Alternate Models

This sprocket (RC788-14430) is known to fit:

  • Kubota U-35
  • Kubota U-35-S2
  • Kubota U-35-4
  • Kubota KX 71-3
  • Kubota KX 91-3
  • Kubota U-25 Serial Numbers: 20001 to 25293

Sprocket Hardness

Smaller sprockets for mini track loaders and mini excavators are hardened in a one step procedure via electrical induction. This increases the depth of the hardness through the teeth while preventing breakage. Our aftermarket sprockets are hardened within millimeters of the original OEM sprocket which provides a great value for our customers overall.

Related Products for Kubota KX 91-3 Mini Excavator

Kubota KX 91-3 and KX 71-3 Rubber Tracks 300 x 53 x 80 rubber tracks
Kubota KX 91-3 and KX 71-3 Drive Sprockets RC417-14430
Kubota KX 91-3 Carrier RollersRC411-21903
Kubota KX 91-3 Idlers RC411-21306
Kubota KX 91-3 Track Rollers RB511-21702