Store

Gehl RT175 RT210 RT250 Yanmar T175 Drive Sprocket

Gehl RT175 Yanmar T175 Sprocket
Rubbertrax
Gehl RT175 RT210 RT250 Yanmar T175 Drive Sprocket
This track loader drive sprocket is interchangeable among Gehl, Mustang and Yanmar models. Please verify your specs or serial number. Save online and skip the trip to the dealer. This sprocket ships free when you check out online, but you must verify the number of bolt holes and drive teeth your current sprocket has prior to ordering online.
SKU: 270322
Weight: 48 lbs
Make: Gehl
Shipping: Fast and Free!
Price: $335.00

Free Shipping Across the USA

50313477 270322 Gehl Mustang and Yanmar Drive Sprocket

There is a serial number break for these models but you can tell the difference as simple as verifying the number of drive teeth and bolt holes on your existing sprocket. This sprocket has sixteen teeth with eight bolt holes and the newer generation has seventeen teeth. The latest generation has seventeen drive teeth with twelve bolt holes so you must verify prior to ordering. This is the aftermarket replacement drive sprocket for the following Gen 2 Gehl, Mustang, and Yanmar compact track loaders:

  • Gehl RT175
  • Gehl RT210 serial numbers 921001 and up
  • Gehl RT250 (270322)
  • Mustang 1650RT
  • Mustang 1750, 1750RT, 1750RT NXT3, 1850RT (50313477)
  • Mustang 2100RT, 2100RT NXT3
  • Mustang 2150RT, 2150RT NXT3
  • Mustang 2500RT
  • Mustang 3200VT
  • Yanmar T175
  • Yanmar T210

270322 50313477 Sprocket specifications:

  • 16 Teeth
  • 8 Bolt Holes
  • Inside Diameter: 9 Inches
  • Outside Diameter: 17 3/4 Inches

Please call if your sprocket does not match these specifications as some serial number breaks may apply.

Alternate Part Numbers

  • Gehl Dealer Part Number: 270322, 172551-03380
  • Mustang Dealer Part Number: 50313477

Alternate Models

This sprocket (270322) is known to fit:

  • Gehl RT175
  • Gehl RT210
  • Gehl RT250
  • Mustang 1750RT
  • Mustang 2100RT
  • Mustang 2500RT
  • Yanmar T175
  • Yanmar T210

Quality Sprockets

Our Gehl and Yanmar track loader sprockets start out with high quality steel. Since the focus of the hardening is localized to the drive teeth we use a type of spin induction heat treatment followed by an immediate quenching process which rapidly hardens the tooth several millimeters deeper than our competitors sprockets. Our sprockets are hardened within millimeters of the OEM sprocket providing you the best value for your replacement parts.

Gehl RT-175 RT-210 RT-250 Undercarriage



Yanmar T-210 T-175 Track Loader Parts