Buy premium replacement aftermarket drive sprockets for the GEHL CTL 75 and CTL 80 compact track loaders. This sprocket also fits the CTL 70 if your serial number is greater than 1390. This sprocket is also interchangeable with the Takeuchi and Mustang track loaders.
181147 Sprocket specifications:
- 14 Teeth
- 9 Bolt Holes
- Inside Diameter: 9 1/2 Inches
- Outside Diameter: 18 1/2 Inches
- Width at Base of Tooth: 1 7/8 Inches
Alternate Part Numbers
- Takeuchi Dealer Part Number: 08811-60110, 881160110
- Gehl Dealer Part Number: 181147
Optional Sprocket Availability
The 182792 sprocket
part is an option for your Gehl CTL70 with serial numbers below 1390. This option has the smaller mounting hole of roughly 8 inches diameter.
This sprocket (181147) is known to fit:
- Gehl CTL70 serial number above 1390
- Gehl CTL75
- Gehl CTL80
- Takeuchi TL140 serial number above 21402001
- Takeuchi TL10
- Takeuchi TL12
- Takeuchi TL240
- Takeuchi TL250
Quality Gehl Sprockets
Our Gehl skid steer track loader sprockets start out with high quality steel. Since the focus of the hardening is localized to the drive teeth we use a type of spin induction heat treatment followed by an immediate quenching process which rapidly hardens the tooth several millimeters deeper than our competitors sprockets. Our sprockets are hardened within millimeters of the OEM sprocket providing you the best value for your replacement parts.
The Gehl CTL 80 drive sprocket is located at the top of the undercarriage to the rear of the machine. The sprocket bolts to the drive motor with nine bolts (hardware not included).