This is the optional width staggered block tread pattern replacement rubber track for Caterpillar® and other common brands of compact track loaders. The tread pattern shown is the most common tread pattern but other options are available. This is our staggered block tread pattern for maximum floatation in general use applications. The track sixteen inches wide with fifty six metal links down the center of the track. This rubber track is guaranteed to fit as the narrow option for the specified Caterpillar, John Deere, JCB, and Case models below, however, we do stock a 320 mm wide option that may also be suitable for your machine as well.
You must verify width of track and number of links prior to ordering. This track is sixteen inches wide with fifty-six drive links. If your sixteen inch wide track has sixty drive links you need 400x86x60
This rubber track is guaranteed to fit the following models as the narrow option:
- Case 450CT
- Caterpillar 279 C2 (optional size)
- Caterpillar 279D (optional size)
- Caterpillar 289 C2 (optional size)
- Caterpillar 289D (optional size)
- Caterpillar 289D3 (optional size)
- IHI CL45
The JCB loader models listed below come standard with a twelve inch wide track typically in a zig-zag tread pattern. We offer tread patterns in each width for the JCB models and this sixteen inch wide option gives your JCB more flotation compared to the original equipment twelve inch option.
- JCB 225T
- JCB 250T (verify size)
- JCB 260T
- JCB 300T
- JCB 320T
The John Deere loader models listed below come standard with a twelve inch wide track typically in a zig-zag tread pattern. We offer tread pattern options in each width for the John Deere models and this sixteen inch wide option gives your John Deere more flotation compared to the original equipment twelve inch option. Many John Deere operators choose the eighteen inch wide option for their 333E models. This sixteen inch wide version is a great compromise.
- John Deere 329D (narrow option)
- John Deere 329E (narrow option)
- John Deere 333D (narrow option)
- John Deere 333E (narrow option)
Alternate Part Numbers
- Caterpillar® Dealer Part Number: 357-0233, 512-3952, 592-5828
- John Deere® Dealer Part Number: T317182, T229965
This track comes in a 320mm (12.5 inches) width and an 450mm (18 inches) width also. Please call for details and to verify if the additional width will work on your machine. This track is generally available in our staggered block tread pattern however other tread patterns may be available upon request.
Our rubber tracks are made with helically wound continuous steel cords that are coated for protection against rust that are designed for reliable service in rigorous conditions. We use non-recycled rubber in our most technologically advanced factory that strives to bring continuous improvements to our quality products.
This track comes with a standard warranty against manufacturer defects. Always consider changing your sprockets and any worn undercarriage parts when you change your tracks. Rubber tracks and sprockets are designed to wear together and changing sprockets at any other time would reduce the lifespan of both the track and the sprocket. Other worn parts can effect the tensioning of the track and can cause de-tracking and other wear issues.
Tread Patterns Commonly Available
| || |
The off-set block tread pattern is the most general purpose tread pattern for wide spread job site applications. Adequate traction with maximum floatation helps prevent damage to sensitive areas while still providing enough traction for typical job sites.
| || |
The off-set C tread pattern is common among original equipment manufactures because it gives significant forward traction and grip as well as extra traction provided by the C shaped pads when operating across a slope, even though that is not suggested practice.
| || |
This tread pattern allows for maximum traction in a wide variety of applications including mud, snow, and slopes. The additional tread depth gives you more forward traction with just enough jagged zig zag edges to provide traction on a slide slope.