This track is highly interchangeable across compact track loader manufacturers. This track is known as the narrow option for several models including these:
This is the highest quality aftermarket replacement rubber track for the John Deere compact track loader model 319D, CT 322, CT323 and 323 series. This track is the narrow track option for this machine known as the original dealer part number T317180, or T254109. This track is 12.5 inches wide and has fifty two metal links down the center of the track where the sprocket rotates.
This track comes with a standard warranty against manufacturing defects. If sprockets are purchased and installed together with the tracks, you will maximize the lifespan of your rubber tracks. Always consider changing your sprockets and any worn undercarriage parts when you change your tracks. Rubber tracks and sprockets are designed to wear together and changing sprockets at any other time would reduce the lifespan of both the track and the sprocket. Other worn parts can effect the tensioning of the track and can cause de-tracking and other wear issues.
The off-set block tread pattern is the most general purpose tread pattern for wide spread job site applications. Adequate traction with maximum floatation helps prevent damage to sensitive areas while still providing enough traction for typical job sites.
This tread pattern allows for maximum traction in a wide variety of applications including mud, snow, and slopes. The additional tread depth gives you more forward traction with just enough jagged zig zag edges to provide traction on a slide slope. For your original Bobcat® twelve inch wide Zig Zag tread pattern track the part number is: 7374156, or 7332342EF in the Earthforce aftermarket version.
The off-set C tread pattern is common among original equipment manufactures because it gives significant forward traction and grip as well as extra traction provided by the C shaped pads when operating across a slope, even though that is not suggested practice. For your original Bobcat® this part number is 6680149, or 7316760 for the twelve inch C-Pattern.
The Multi-Bar tread pattern is common on original Catâ„¢ track loaders and is best used in places where floatation matters such as sandy or snow conditions.
The turf-friendly is a newer option for rare cases when you are using a full sized track loader for finishing residential work or situations when minimal traction is required. This track minimizes vibration on the operator. For your original Bobcat® this tread pattern in the twelve inch wide option is known as the Hex Tread pattern using part number: 7327931, or 7327931EF under the Earthforce aftermarket version.
Free shipping from one of our seven warehouses.*
* Restrictions apply. See details at checkout.