Free Shipping to commercial address. *Restrictions apply

Store

Ditch Witch® SK 750 Hub and Spindle

Ditch Witch SK755 Hub
Rubbertrax
Ditch Witch® SK 750 Hub and Spindle
Ditch Witch SK755 Hub
Ditch Witch® SK 750 Hub and Spindle
205-1216 Straight Shaft
Ditch Witch® SK 750 Hub and Spindle
(Click to see larger image and other views)
Rubbertrax is now offering the aftermarket hub and spindle for your Ditch Witch® SK 750 mini skid steer. These spindles are interchangeable on many of the mini skid steer models. Save online and skip the trip to the dealer. These hubs ship free when you check out online. There is a new version of this hub and spindle with a tapered shaft so you must verify that you have the straight shaft version prior to ordering online. They are not interchangeable.
SKU: 205-1216
Weight: 10 lbs
Shipping: Fast and Free!
Price: $192.00
Availability: Currently Out of Stock

Rubber tracks and wear parts are sold individually unless specified in the details. We offer free shipping across the USA when you order online and ship to a commercial address. *Some restrictions apply.

This is the aftermarket Ditch Witch® SK750 hub and spindle assembly that is considered a creased cap. It comes exactly as pictured with the nuts for installation. This hub and spindle assembly will fit in the replacement bottom rollers (301-1795/ 301-0833) as well as the idlers (160-1300). Enhancements have been made to the cap because the original dealer design was flawed in a manner that allowed the caps to fall off during normal operation. Our improvements have resolved that situation. The bolts are tapered so you should be installing the rollers and idler wheels on the tapered side for a proper fit.


  • Ditch Witch® SK600
  • Ditch Witch® SK750
  • Ditch Witch® SK752
  • Ditch Witch® SK755 (Does not fit rear Idler Roller)
  • Ditch Witch® SK800 (Does not fit rear Idler Roller)
  • Ditch Witch® SK850
  • Ditch Witch® SK1050 (See details below)
  • Ditch Witch® SK1550 (Only fits the rollers, not the idlers)

If you have a SK1050 with the following serials, your machine requires 5 per side for a total of 10 per machine:

  • BEGINS WITH S/N: CMWSK750JF0001028, CMWSK755CF0001057, CMWSK850HF0000362

If you have a SK1050 with the following serials, your machine only requires 3 per side for a total of 6 per machine:

For these serial breaks the hub will not fit the rear idler wheel
  • DWPSK150HK0001544, DWPST37XJK0000077, DWPSK755PJ0001253, DWPSK800EJ0000942, DWPSK105PJ0000589 and DWPST37XCJ0000029

  • BEGINS WITH S/N: DWPSK755PJ0001253, DWPSK800EJ0000942, DWPSK105PJ0000589 and DWPST37XCJ0000029
  • ENDS WITH S/N: DWPSK105K0001543, DWPST37XKK0000076

  • This hub and spindle assembly supersedes 205-1183 and it includes lug nuts 105-1602. The dust cap retainer 205-1213 has been replaced with a screw-on cap design that will not fall off like the original design. The lug nuts should only be torqued to 85 foot pounds to prevent damage to the sprocket.



    Alternate Part Numbers

    • Ditch Witch® Dealer Part Number: 205-1216, 205-1183

    Detailed Verification

    This hub and spindle assembly has a straight shaft. You must remove your existing part to verify that you are not using the tapered shaft version from the latest generation. The straight shaft 205-1216 can not replace the tapered shaft 302-6126

    We also stock the sprockets, idlers, bottom rollers, and the rubber track for the Ditch Witch® SK 750 and SK 755. Rely on Rubbertrax to have what you need at an affordable price when you need it most.