Takeuchi TL 226 Aftermarket Rubber Track

Takeuchi 320x86x48 Rubber Tracks

This is the optional staggered block tread pattern aftermarket replacement rubber track for Takeuchi TL 26, TL 126, and the TL 226 skid steer loaders. The tread pattern shown is the actual tread pattern you will receive. This is our staggered block tread pattern for maximum floatation in general-use applications. The track is twelve and a half inches wide and has forty-eight metal embedded guide links down the center where the sprocket engages the track to rotate.

These rubber tracks are designed to fit the older model green machine as well as the later model red and gray Takeuchi TL 26 and TL 26-2 series track loaders. We carry sprockets and rollers for the Takeuchi TL 26 series as well. This rubber track is guaranteed to fit models:

• Takeuchi TL 26
• Takeuchi TL 26-2 (must verify size)
• Takeuchi TL 126
• Takeuchi TL 226

Other tread patterns may be available for your Takeuchi skid steer loader. See the alternate options at the bottom of our page or please call if you have specific needs.

This track comes with a standard warranty against manufacturer defects. Always consider changing your sprockets and any worn undercarriage parts when you change your tracks. Rubber tracks and sprockets are designed to wear together and changing sprockets at any other time would reduce the lifespan of both the track and the sprocket. Other worn parts can affect the tensioning of the track and can cause de-tracking and other wear issues.

Takeuchi TL 26 Tread Patterns Commonly Available

The off-set block tread pattern is the most general purpose tread pattern for widespread job site applications. Adequate traction with maximum floatation helps prevent damage to sensitive areas while still providing enough traction for typical job sites.