Store

Our Products: Bobcat Rubber Tracks

Rubber Track for Bobcat X325 328

Bobcat 325 328 Tracks
Rubbertrax
Rubber Track for Bobcat X325 328
Replacement rubber tracks for Terex, JCB, Mustang, Hitachi, and Bobcat® mini excavators are interchangeable. This track now comes in optional widths and tread patterns. Save online and skip the trip to the dealer. This rubber track ships free when you check out online.
SKU: RT100402A
Weight: 235 lbs
Make: Bobcat
Which Rubber Track Size: 300 x 52.5 x 74
Shipping: Fast and Free!
Price: $1,170.00

Free Shipping Across the USA

This is an aftermarket original specification direct replacement rubber track for several Bobcat® mini excavator models. The tread pattern shown is the most popular but tread pattern options may be available upon request. The track is almost twelve inches (300 mm) wide with seventy four metal embedded links down the center. This rubber track is guaranteed to fit models:


  • Bobcat® x325 (325 and 325D)(Replaces Bobcat® Bridgestone track 6672773)
  • Bobcat® x328 and x328E (Replaces Bobcat® Bridgestone track 6672773)
  • Hitachi EX 18-2
  • Daewoo Solar 25
  • Hitachi Zaxis 25
  • Mustang ME2702
  • Mustang ME 2902
  • Terex TC 25
  • Terex TC 29

Alternate Part Numbers

  • Bobcat® Dealer Part Number: 6672773, 6667025, and 6988830

Alternate Width

This rubber track comes in 320mm width option under part number: RT100502A 320 x 52.5 x 74 tracks. There is also a narrow version in 250mm width (just less than 10 inches) in the 250x52.5x74 track size.

Optional Part Availability

There are no optional or alternate part numbers listed for the 325 and this rubber track is guaranteed to fit. This is an optional size for the Bobcat® 225 but please verify size prior to ordering for the 225 as it has an optional forty link rubber track

Staggered Block Tread Pattern

The off-set block tread pattern is a general purpose tread pattern for most job site applications. Adequate traction with maximum floatation helps prevent damage to sensitive areas while still providing enough traction for typical job sites. The staggered block tread pattern is common on mini excavators that are not frequently used in one way operation when you need traction in both directions.

Directional Tread Pattern

The directional tread pattern provides optimal traction for mini excavators while providing extra support along the guide system with offset pads. The offset pads help reduce vibration for the operator. The staggered block tread pattern is common on mini excavators that are frequently used in one way operation.