Rubber tracks and wear parts are sold individually unless specified in the details. We offer free shipping across the USA when you order online and ship to a commercial address. *Some restrictions apply.
Buy Bobcat Rubber Tracks Online T870
This is the perfect replacement Bobcat rubber track for your skid steer loader specifically designed for the Bobcat T870, Mustang 2500 RT, and certain Loegering undercarriage systems. This Bobcat track size has become more popular when it was introduced on the Bobcat® T870 compact track loader.
This is an optional staggered block tread pattern for maximum floatation in general-use applications for Bobcat® compact track loaders. The tread pattern shown is the actual tread pattern you will receive when you buy Bobcat tracks online. The track is eighteen inches (450 mm) wide and has fifty-eight metal embedded links down the center where the sprocket rotates.
Bobcat® T870 owners with late-model serial numbers require a different track size, which is two links longer than the previous generation T870 track. The T870 serial numbers below originally came with the sixty link option under part number 450 x 86 x 60:
- B47C11001 & ABOVE
- B47L11001 & ABOVE
- B47H11001 & ABOVE
Other tread patterns may be available for your Bobcat® T870 track loader. See the alternate options at the bottom of our page or please call if you have specific needs.
Bobcat Rubber Track Part Numbers
- Bobcat Dealer Part Number: 6691568
Bobcat Rubber Track Sizes
- Bobcat Dealer Sizes: 450x86x58 450x58x86
Bobcat T870 Tread Pattern Options
We stock this track in the staggered block tread as well as C-pad. Other tread patterns may be available upon request. Multi-bar tread patterns are commonly available for this size. See the listing below.
This track comes with a standard warranty against manufacturer defects. If sprockets are purchased and installed together with the tracks, you will increase the lifespan of your rubber track. Always consider changing your sprockets and any worn undercarriage parts when you change your tracks. Rubber tracks and sprockets are designed to wear together and changing sprockets at any other time would reduce the lifespan of both the track and the sprocket. Other worn parts can affect the tensioning of the track and can cause de-tracking and other wear issues.
Bobcat Rubber Track Tread Patterns Available
The off-set block tread pattern is the most general-purpose tread pattern for widespread job site applications. Adequate traction with maximum floatation helps prevent damage to sensitive areas while still providing enough traction for typical job sites.
The off-set C tread pattern is common among original equipment manufacturers because it gives significant forward traction and grip as well as extra traction provided by the C-shaped pads when operating across a slope, even though that is not suggested practice. The original C-Pad for the Bobcat® T870 is known as part number 7277043.
The Multi-Bar tread pattern is common on original Catreg; track loaders and is best used in places where floatation matters, such as sandy or snowy conditions. The T870 Multi-Bar tread pattern eighteen-inch wide track is known as part number 6989042
This tread pattern allows for maximum traction in a wide variety of applications including mud, snow, and slopes. The additional tread depth gives you more forward traction with just enough jagged zig zag edges to provide traction on a sliding slope. The original Zig Zag for the Bobcat® T870 is known as part number 7374157.
Turf-friendly is a newer option for rare cases when you are using a full-sized track loader to finish residential work or situations when minimal traction is required. This track minimizes vibration on the operator. The original Hex pattern for the Bobcat® T870 is known as part number 7327934.
Upgrade your Bobcat® T870 series rubber tracks to our premium aftermarket rubber tracks and increase the lifespan and performance of your undercarriage. We now supply the complete line of T870 series undercarriage parts including the drive sprocket (7196807), the front idler wheel (6698048), the rear idler (6698049), and the bottom track rollers down the center of the undercarriage (6698047). We also stock rubber tracks in both staggered block tread patterns and aggressive tread patterns.
The Bobcat® T870 and the Kubota SVL95/SVL97-2 use the same 450x86x58 track size so our listings refer to both brands in the listings.
Bobcat T870 Rubber Track Fitment FAQ
The rubber track size you need for the Bobcat T870 is a 450x86x58 which is 18 inches wide with 58 drive links down the center of the track. This save size fit many Bobcat, John Deere, and Kubota models.
Yes. We stock several tread patterns in addition to the staggered block.
Yes, we offer the full line of sprockets, rollers, and the front / rear idlers. In this case, the undercarriage parts vary by undercarriage type and serial break.