Rubber tracks and wear parts are sold individually unless specified in the details. We offer free shipping across the USA when you order online and ship to a commercial address. *Some restrictions apply.
400 x 86 x 50 Rubber Tracks C Pad Tread
The 400x86x50 track size is found on several Bobcat® and Case compact track loaders. This is the C-Pad tread pattern in the sixteen inch width option for these models. If you need a balance of traction and flotation then the C-Pad tread pattern is the right option for your track loader. This track is guaranteed to fit all models with a 400x86x50 track size and the most common models are listed below for reference.
Bobcat® T62 T64 T66 Series Tracks
The Bobcat® T62 - T66 typically use the C-Tread pattern originally but we offer several tread patterns in the sixteen inch wide tracks size. This track replaces original part numbers 7324236, and 7408148 from your Bobcat® dealer. The T62 and T66 series can also use the other track width options mentioned below. Other models from Bobcat® require this size and we guarantee fit on these models
- Bobcat® T62
- Bobcat® T64
- Bobcat® T66
CNH Series Tracks
The Case and New Holland series compact track loaders also use this common track size. Please check your existing rubber track width prior to replacing them with the sixteen inch wide version to verify that you have the clearance required. Give us a call if we can help with your track width or tread pattern decision. This track is guaranteed to fit the following CNH models:
- Case 440CT
- Case TR310
- Case TR310B
- New Holland C175
- New Holland C227
400x86x50 Other Specifications
It is possible that your track is twelve and a half inches wide and there is also an eighteen inch wide version.
This track commonly comes in the staggered block tread pattern for more flotation than your original track. We also stock the C-Pad, Multi-Bar, and Zig Zag tread pattern in this size. Please see options at the bottom of the page.
Alternate Part Numbers
- Bobcat® Dealer Part Number: 7324236, 7408148
Optional Track Fitment
We commonly stock the staggered block tread pattern as well as the C-Pad, and Zig Zag tread as detailed below.
C-Tread Track Quality
Our skid steer track loader rubber tracks are made with helically wound continuous steel cords that are coated for protection against rust. These rubber tracks are designed for reliable service in rigorous conditions. We use non-recycled rubber in our most technologically advanced factory that strives to bring continuous improvements to our quality products. Our cut-resistant edges and premium heavy-duty guide systems deliver the absolute best quality rubber tracks in the aftermarket.
This track comes with a standard warranty against manufacturing defects. If sprockets are purchased and installed together with the tracks, the rubber track lifespan will be maximized. Always consider changing your sprockets and any worn undercarriage parts when you change your tracks. Rubber tracks and sprockets are designed to wear together and changing sprockets at any other time would reduce the lifespan of both the track and the sprocket. Other worn parts can effect the tensioning of the track and can cause de-tracking and other wear issues.
Tread Patterns Commonly Available
The off-set block tread pattern is the most general purpose tread pattern for wide spread job site applications. Adequate traction with maximum floatation helps prevent damage to sensitive areas while still providing enough traction for typical job sites.
The off-set C tread pattern is common among original equipment manufactures because it gives significant forward traction and grip as well as extra traction provided by the C shaped pads when operating across a slope, even though that is not suggested practice.
This tread pattern allows for maximum traction in a wide variety of applications including mud, snow, and slopes. The additional tread depth gives you more forward traction with just enough jagged zig zag edges to provide traction on a slide slope.